Information on screen Explanation
The Blue bar is indicating the current process
step.
When upgrade is ready; no blue bar
PRISMAsync: Warning Copying unknown ver-
sion …… to engine
This message is reported when for PRISMA-
sync an unknown version is present on the
USB key and copied to the engine.
Engine state: un-configured (in Blue bar)
DLM, Download mode version …..
Engine is set to safe download mode.
Pop-up menu is requesting to shut down en-
gine and accessories and switch on engine and
accessories again.
This pop-up screen is indicating that a fault is
occurred.
Most likely the firmware of one of the accesso-
ries is not installed correctly.
Check for reason and take corrective actions.
Action required: Power off and on the engine.
NOTE
For imagePRESS C800 series the ac-
cessories are switched on and off by
the engine automatically.
4
Firmware upgrade additional information
Chapter 8 - Firmware upgrades via PRISMAsync 93
PRISMAsync V3.2
To Next Page
Loading...
