Information on screen Explanation
EXT…. Version-up error
Engine reports an error when upgrading.
Check for reason and take corrective actions.
The scroll bar can be used to review the infor-
mation to find the applicable module.
This screen is indicating that a module is not
programmed.
Not necessarily an error.
Possible case: module is not present.
The scroll bar can be used to review the infor-
mation to find the applicable module.
Check for reason and take corrective actions.
Fault detected with USB key.
File name or content is invalid.
For analysis the current upgrade policy can be
checked via PRISMAsync service mode -> Er-
ror analyses. The current policy is showed. Af-
ter each PRISMAsync the policy is checked
again.
NOTE
Only applicable for PRISMAsync for
imagePRESS C800 series.
Firmware upgrade additional information
94 Chapter 8 - Firmware upgrades via PRISMAsync
PRISMAsync V3.2
To Next Page
Loading...
Need help?
General
