Canon VB-M741LE - Page 239

Admin Tools
6
239
(2) [Date & Time]
[Specify start date & time]
When selected and a date and time are entered, logs generated on or after the specified date and time are
shown.
[Specify end date & time]
When selected and a date and time are entered, logs generated on or before the specified date and time
are shown.
Only shows logs matching the specified conditions.
2
Click [Apply filter]
Important
The logs saved in the camera will be deleted in the following cases.
– When [Reboot] or [Restore Default Settings] in [Maintenance] > [Tool] on the Setting Page are run.
– Factory default settings are restored with the reset switch on the camera.