97
RIGHT PAGE (First)
Bur 6-34090EUR
OPERATING INSTRUCTIONS
BEFORE STARTING THE ENGINE
1. Do a daily walk around, visual
inspection of the machine. Check
for such items as hoses rubbing
against other components, oil
leaks, debris or trash buildup, loose
bolts, damaged, or missing parts
that would effect the normal and
safe operation of the machine.
Make any necessary corrections
before operating the machine.
2. See the Maintenance Chart in this
manual and do the items in the 10
Hour section.
3. Check that the machine fuel tank is
filled with clean fuel that has the
specification given in this manual.
CM112
RUN-IN PROCEDURE
It is important that the run-in
instructions for a new engine be
followed. Proper run-in will increase
engine power and service life. If the
engine is not run-in properly, the piston
rings and cylinder bore can be
damaged.
During the first 100 hours of operation,
operate the machine as follows:
1. Do not run the engine at idle speed
for long periods of time.
2. Operate the machine with normal
loads as much as possible.
3. Monitor the engine instruments
frequently during operation.
Reduce throttle and/or load if the
coolant temperature exceeds safe
operating limits.
WARNING: DO NOT operate the machine while under the influence of
alcohol or drugs.
To Next Page
Loading...
Need help?
General
