EasyManua.ls Logo

Case 921C - Towing the Machine

Case 921C
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATING INSTRUCTIONS
126
LEFT PAGE
Bur 6-34090EUR
TOWING THE MACHINE
If your machine is disabled, you must make a judgment if the machine can be
moved without further damage. If possible, repair the machine at the job location.
If you cannot repair the machine at the job location and if you have a transport
trailer, park the trailer as close as possible to the machine (see Transporting the
Machine in this manual).
If you must tow the machine, read the following recommendations and use
caution.
NEVER TOW MACHINE FROM THE FRONT.
1. Attach a rigid drawbar to a pin in
the rear counterweight.
BD02B048
2. If the machine cannot be started to
release the parking brake, do the
following:
A. Put blocks in front of and behind
each tire.
B. Remove the Parking brake
cover (1).
C. Loosen the lock nut (2).
D. Turn the adjusting screw
counterclockwise until the
parking brake is released (3).
3. If the machine is to be towed more
than 1/2 mile (0.8 km) you must
disconnect the front and rear drive
shafts.
4. Tow the disabled machine at a
maximum speed of 5 mph (8 km/h).
300372A1
1
2
3
Copyright ©

Table of Contents

Related product manuals