SAFETY/DECALS/HAND SIGNALS
11
RIGHT PAGE
Bur 6-34090EUR
BEFORE OPERATION
● Different jobs will require different
protective equipment. Items such as
hard hats, protective shoes, heavy
gloves, reflector type vests,
respirators, and ear protection can
be required. Know and use the
equipment that is required before
you start the job.
● Be prepared for emergencies.
Always have a first aid kit and a fire
extinguisher on the machine. Be
sure that the extinguisher is properly
maintained and be familiar with its
proper use.
● Know the hand signals used on your
job. Follow the instructions of the
flagman, signs, etc.
● Know the rules, laws, and safety
equipment necessary for
transporting or driving this machine
on a road or highway. Rotating
beacon, backup alarm, SMV, and
other items are available from your
dealer.
● Avoid loose fitting clothing, loose or
uncovered long hair, jewelry, and
loose personal articles.
● Foreign material or grease on the
steps and hand rails can cause an
accident. Keep the steps and hand
rails clean.
● Always use the hand rails when
mounting or dismounting from the
machine. Always face the machine
when mounting or dismounting. This
will provide more secure hand and
foot mobility to help prevent slipping
and possible injury.
● Remove all loose objects from the
operators area and from the
machine. Loose objects can jam
controls and cause accidents.
● Operate controls only when seated in
the Operators seat.
● Before starting the engine, securely
fasten your seat belt. Your machine
is equipped with a ROPS cab or
canopy for your protection. The seat
belt can help insure your safety if it
is used correctly and maintained.
Never wear a seat belt loosely or
with slack in the belt system. Never
wear the belt in a twisted condition
or pinched between the seat
structural members.
● Make sure all persons are away from
the machine before you start the
engine.
● Before starting the engine, be sure
all operating controls are in neutral
and the parking brake is applied.
● Sound horn to alert persons in the
work area.
To Next Page
Loading...
