LUBRICATION/FILTERS/FLUIDS
151
RIGHT PAGE
Bur 6-34090EUR
ENGINE LUBRICATION
Engine Oil Selection
Case No. 1 Engine Oil is recommended for use in your Case Engine. Case
Engine Oil will lubricate your engine correctly under all operating conditions.
If Case Multi-Viscosity Engine Oil is not
available, use only oil meeting API
engine oil service category CH-4
(preferred) or CG-4
RH99K130
BP97H064
See the chart on following page for recommended viscosity at ambient air
temperature ranges.
NOTE: Do not put Performance Additives or other oil additive products in the
engine crankcase. The oil change intervals given in this manual are according to
tests with Case lubricants.
To Next Page
Loading...
