235
RIGHT PAGE
Bur 6-34090EUR
AFTER DELIVERY CHECK
AFTER FIRST 100 HOURS OF OPERATION OF NEW MACHINE
Owners Name:
Address:
Dealers Name:
Address:
Machine Model Number:
Hourmeter Indication:
Machine Product Identification Number (P.I.N.):
COOLING SYSTEM
Check the coolant levels.
Check for leaks.
FUEL SYSTEM
Check for leaks.
Drain water and sediment from the fuel tanks.
ELECTRICAL SYSTEM
Check battery.
Check operation of starter, alternator, and
instruments.
Check operation of all lamps.
LUBRICATION
Lubricate all pivot points.
Check the tansmission and axle oil level.
Engine
Check condition of drive belt.
Check engine oil level.
Check engine speed at idle and at full throttle.
Service air cleaner.
HYDRAULIC SYSTEM
Check the oil level.
Check the pressure setting of the main relief valve.
Replace the hydraulic oil filter.
GENERAL
Look for oil leaks and loose parts.
Check tire pressure.
Tighten all hose clamps.
Check drive chain tension..
Check wheel nut torque.
Check brake operation.
Check the control levers for correct operation.
Check the operators seat bar for correct operation.
SAFETY
Inspect the ROPS.
Check the safety decals and replace if necessary.
Check the operator restraint system.
Make sure the machine has the operators manual in
the manual storage box.
DEALER: Make sure the owner and/or operator understands all the safety and information decals, the
service information, and the service procedures in this manual.
Technician Signature:
Dealer Signature:
Owner Signature:
Dealer Copy
To Next Page
Loading...
Need help?
General
