EasyManua.ls Logo

Case 921C - Specifications; Engine Data

Case 921C
244 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
215
RIGHT PAGE (First)
Bur 6-34090EUR
SPECIFICATIONS
ENGINE DATA
NOTE: All specifications are given according to SAE Standards or
Recommmended Practices where the specification applies.
Make and model .................................................................. Cummins QSM11 - C
Type ........................................................................ six cylinder, four stroke cycle,
turbocharger aftercooled Air to Air
Firing order ........................................................................................... 1-5-3-6-2-4
Bore and stroke .................................................. 125 x 147 mm (4.92 x 5.79 inch)
Displacement ...................................................................................... 661 cu inch
Compression ratio ..................................................................................... 16.3 to 1
Horsepower
SAE gross .................................... 216.3 kW at 2 100 r/min (290 at 2100 rpm)
Engine speeds
Full throttle - no load ......................................................................... 2280 rpm
Idle speed ........................................................................................... 970 rpm
Hydraulic stall ...................................................................... 2110 to 2250 rpm
Converter stall ..................................................................... 2040 to 2240 rpm
Combined hydraulic and converter stall .............................. 1490 to 1720 rpm
Valve clearance - engine cold
Intake valves .................................................................. 0.35 mm (0.014 inch)
Exhaust valves .............................................................. 0.68 mm (0.027 inch)
Lubrication System
Oil pressure at idle speed (minimum) ...................................... 70 kPa (10 psi)
Oil pressure at 1 300 rpm ................................. 240 to 310 kPa (35 to 40 PSI)
Type of system ............................................................ pressure and spray
Copyright ©

Table of Contents

Related product manuals