SPECIFICATIONS
224
LEFT PAGE
Bur 6-34090EUR
SPECIAL BOLT TORQUES
Nm POUND-FOOT
Cover plate to rear trunnion bar ........................... 108 to 122 (80 to 90)
Trunnion rear inner plate to axle .......................... 285 to 319 (210 to 235)
Trunnion casting mounting................................... 658 to 739 (485 to 545)
Engine support bracket to rear chassis................ 386 to 434 (285 to 320)
Transmission mounting to transmission ........... 1125 to 1274 (830 to 940)
Drive line mounting bolts...................................... 136 to 149 (100 to 110)
Transmission to flywheel housing ............................ 54 to 60 (40 to 44)
Fan mounting nut ................................................. 108 to 122 (80 to 90)
Wheel mounting nuts ........................................... 515 to 569 (380 to 420)
Carrier bearing bolt .............................................. 149 to 163 (110 to 120)
Hydraulic pump to transmission ........................... 237 to 258 (175 to 190)
Engine and transmission shock mount nuts....... 929 to 1044 (685 to 770)
Cab and canopy mounting bolts........................... 786 to 841 (580 to 620)
Counterweight bolts ......................................... 1125 to 1261 (830 to 930)
Hydraulic tank cover bolt.......................................... 20 to 27 (15 to 20)
Flex plate to flywheel ...............................................32 to 41 (24 to 30)
Hydraulic oil filter head to mounting bracket ............ 20 to 27 (15 to 20)
Engine shock mount nuts..................................... 397 to 447 (293 to 330)
Steering wheel retaining nut..................................... 41 to 47 (30 to 35)
Loader linkage pin keeper.................................... 386 to 434 (285 to 320)
Front axle mounting bolts................................. 1871 to 1979 (1380 to 1460)
Muffler clamp to elbow ............................................. 62 to 73 (46 to 54)
Muffler clamp at turbo .............................................. 16 to 19 (12 to 14)
Front steering pin bolt .......................................... 664 to 691 (490 to 510)
Articulation pivot mounting ................................... 205 to 235 (151 to 173)
Articulation mounting pin keeper.......................... 488 to 515 (360 to 380)
Upper articulation pin keeper bolt ........................386 to 434 (285 to 320)
Brake pump bolts ................................................... 88 to 100 (65 to 74)
Brake pump gear nut ........................................... 108 to 122 (80 to 90)
Brake pump suction line clamps .............................. 10 to 11 (7.5 to 8.3)
Muffler to bracket ..................................................... 66 to 85 (49 to 63)
Muffler bracket to engine.......................................... 60 to 76 (44 to 56)
Charge air cooler bolts ............................................. 28 to 34 (20.6 to 25.2)
Charge air hose clamps ............................................. 9 to 10 (6.7 to 7.5)
Exhaust stack to hood.............................................. 27 to 30 (19.8 to 22.3)
Cooler frame mounting bolts ................................ 118 to 149 (87 to 110)
NOTE: All torques are listed with dry threads.
To Next Page
Loading...
Need help?
General
