Case 921C User Manual

MAINTENANCE/ADJUSTMENT
195
RIGHT PAGE
Bur 6-34090EUR
DECLUTCH ADJUSTMENT
1. Park the machine on a level
surface.
2. Lower the loader bucket to the
floor.
3. Apply the parking brake and stop
the engine.
NOTE: The following photo shows the
brake pedal/valve assembly removed
for clarity. Do not remove the brake
pedal/valve assembly from the
machine.
BD00C006
1. PLUG
2. ADJUSTMENT SCREW
4. Remove the plug (1) from the base
of the left hand brake pedal/valve
assembly.
Clutch Calibration Main
Codes
CLUTCH
CALIBRATIO
N MAIN
CODE
MEANING
00
Clutch Calibration Mode was not
initiated because one of the
requirements was not met.
01 Adjusting 1st gear
02 Adjusting 2nd gear
03 Adjusting 3rd gear
04 Adjusting 4th gear
05 Adjusting Forward gear
06 Adjusting Reverse gear
07 Clutch Calibration Completed
08 Operator aborted calibration
procedure.
09 Aborted while adjusting 1st gear
10 Aborted while adjusting 2nd gear
11 Aborted while adjusting 3rd gear
12 Aborted while adjusting 4th gear
13 Aborted while adjusting Forward gear
14 Aborted while adjusting Reverse gear
Clutch Calibration Sub-
Codes
CLUTCH
CALIBRATIO
N SUB-CODE
MEANING
00
Calibration in process
01 Fault present
02 Shift lever not in neutral
03 Park brake not applied
04 Output speed not 0 kph/mph
05 Low transmission oil temperature
06 High transmission oil temperature
07 Low engine RPM
08 High engine RPM
1
2
Copyright ©

Case 921C Specifications

General

Brand	Case
Model	921C
Category	Compact Loader
Language	English