LUBRICATION/FILTERS/FLUIDS
139
RIGHT PAGE
Bur 6-34090EUR
PLASTIC AND RESIN PARTS
Avoid using gasoline, kerosene, paint thinner, etc., when cleaning plastic
windows, console, instrument cluster, monitor, gauges, etc. Use ONLY water,
mild soap and a soft cloth when you clean these parts.
Using gasoline, kerosene, thinners, etc., will cause decoloration, cracking or
deformation of the part being cleaned.
ENVIRONMENT
Before you service this machine and before you dispose of the old fluids and
lubricants, always remember the environment. DO NOT put oil or fluids into the
ground or into containers that can leak.
Check with your local environmental or recycling center or you dealer for correct
disposal information.
TRANSPORT/SERVICE LINK
SA069
BK00D004
LOCKED POSITION
Before you transport or service this
machine, always put the Transport/
Service link in the LOCKED position
(Shown).
BK00D003
OPERATING POSITION
After servicing and before you move
the machine, return the Transport/
Service link in the OPERATING
position.
WARNING: Keep clear of this area when engine is running. Machine
could pivot unless the transport and service link is in its LOCKED position.
After servicing is completed, unlock the transport and service link and
secure in place on the rear frame pivot.
To Next Page
Loading...
