LUBRICATION/FILTERS/FLUIDS
158
LEFT PAGE
Bur 6-34090EUR
3. Use a clean damp cloth and clean
the inside of the filter body.
RD97D081
4. Install a new secondary (inner)
element. Make sure the element
has full gasket.
5. Install the primary (outer) element
and end cover.
NOTE: Make sure the end cover is in
place and each spring clamp is closed
tight.
6. Close the access door.
CM115
WARNING: Replace all covers or guards after servicing or cleaning the
machine. NEVER operate the machine with covers or guards removed.
To Next Page
Loading...
