MAINTENANCE/ADJUSTMENT
185
RIGHT PAGE
Bur 6-34090EUR
Operators Seat
Remove dust and dirt from the seat with a vacuum cleaner or soft brush. Clean
stains with the correct use of a material cleaner.
Before removing stains, try to find what type and how old the stains are. Some
stains can be removed with water or soap solution.
SA049
CLEANER FLUID - This type of cleaner can be used for grease or oil stains.
Carefully remove the item that caused the stain with a scraper or a knife that is not
sharp. Use very little cleaner, no pressure, and clean cloths. Move the cloth from
the outside of the stain toward the center of the stain and constantly change to a
clean section of cloth.
When the stain is removed from the material, immediately use a cloth to make dry
the area and to prevent a cleaner circle pattern. If a circle pattern occurs, clean
the complete area.
NOTE: A difficult stain can need a second application of cleaner fluid followed
immediately by the use of a soft brush to completely remove the stain.
WARNING: Never use gasoline, naptha or any other volatile material for
any cleaning purposes. These materials may be toxic and/or flammable.
To Next Page
Loading...
