MAINTENANCE/ADJUSTMENT
201
RIGHT PAGE
Bur 6-34090EUR
Damage to the ROPS
If the machine has rolled over or the
ROPS has been in some other type of
accident (such as hitting an overhead
object during transport), you must
replace the damaged ROPS
components to get as much protection
as you had originally.
After an accident, check the following
for damage.
A. ROPS canopy or cab.
B. Operators seat.
C. Seat belt mounting bolts and
seat belt.
Before you operate the machine,
replace all ROPS components that are
damaged.
See the Parts Catalog or your dealer
for components that are replaceable.
DO NOT TRY TO WELD OR
STRAIGHTEN THE ROPS.
SA029
SB026
SA027
SA028
SA036
WARNING: Improper ROPS inspection or maintenance can cause injury
or death. Do the recommended ROPS inspection shown in this manual. If
you must replace the ROPS, ROPS parts, or ROPS mounting hardware,
use only the replacement parts shown in the Case parts catalog for this
machine
WARNING: Do not modify ROPS in any manner. Unauthorized
modifications such as welding, drilling, cutting or adding attachments can
weaken the structure and reduce your protection. Replace ROPS if
subjected to roll-over or damage. Do not attempt to repair.
WARNING: If you operate this machine without a ROPS and the machine
rolls over, you can be injured or killed. Remove the ROPS only for service
or replacement. Do not operate this machine with the ROPS removed.
WARNING: Adding additional weight (attachments, etc.) to the machine
can cause injury or death. Do not exceed the gross weight printed on the
ROPS label
WARNING: Always fasten the seat belt securely before starting the
engine
To Next Page
Loading...
