195
11-4 Displaying a Graph in the Inactive Screen
There are two methods you can use to display a graph in the inactive screen. You
can copy a graph from the active screen to the inactive screen, or you can move the
graph from the active screen to the inactive screen. In both cases, you must first
draw the graph in the left-side active screen.
kk
kk
k Before Displaying a Graph in the Inactive Screen
After drawing a graph in the active screen, press K, and the Dual Graph function
menu appears at the bottom of the display.
K
1 (COPY) .... Copies active graph to inactive screen
2 (SWAP) .... Switches active screen and inactive screen
3 (PICT) ...... Picture function
kk
kk
k Copying the Active Graph to the Inactive Screen
Example To draw the graph for y = x (x + 1) (x – 1) on the active screen and
the inactive screen
Use the following View Window parameters:
Active (Left) Screen Inactive (Right) Screen
View Window parameters View Window parameters
Assume that the function being graphed is stored in memory area Y1.
Draw the graph in the active
screen.
6(DRAW)
123456
P.159
123456
To Next Page
Loading...
Need help?
General
