16
1-1 Before Starting Calculations...
Before performing a calculation for the first time, you should use the Set Up Screen
to specify the angle unit and display format.
kk
kk
k Setting the Angle Unit (Angle)
1. Display the Set Up Screen and use the f and c keys to highlight “Angle”.
1 (Deg) ........ S pecifies de gre es as
default.
2 (Rad) ........ S p e c i f i e s r a d i a n s a s
default.
3 (Gra) ........ Specifies grads as default.
2. Press the function key that corresponds to the angle unit you want to use.
• The relationship between degrees, grads, and radians is shown below.
360° = 2! radians = 400 grads
90° = !/2 radians = 100 grads
kk
kk
k Setting the Display Format (Display)
1. Display the Set Up Screen and use the f and c keys to highlight “Display”.
1 (Fix) .......... Displays screen for specifi-
cation of number of decimal
places.
2 (Sci) ......... Displays screen for specifi-
cation of number of signifi-
cant digits.
3 (Norm) ..... Switches exponential format display range.
4 (Eng) ........ Displays calculation results using engineering notation.
2. Press the function key that corresponds to the display format you want to use.
123456
123456
To Next Page
Loading...
Need help?
General
