Chroma 63800 Series - Time Measurement; RLC Measurement

Remote Operation
8-11
FETCh[:SCALar]:VOLTage:UNDershoot?
Description: Return the undershoot voltage in DC Mode.
Query Syntax : MEASure[:SCALar]:VOLTage:UNDershoot?
FETCh[:SCALar]:VOLTage:UNDershoot?
Response Parameter : <NR2>
Example : MEAS:VOLT:UND?
8.6.2.6 Time Measurement
MEASure | FETCh
[:SCALar]
:TIME
:HOLD Return the measurement value of hold up time (msec)
:TRAN Return the measurement value of transfer time (sec)
MEASure[:SCALar]:TIME:HOLD?
FETCh[:SCALar]:TIME:HOLD?
Description: Return the measurement value of hold up time (msec)
Query Syntax : MEASure[:SCALar]:TIME:HOLD?
FETCh[:SCALar]:TIME:HOLD?
Response Parameter : <NR2>
Example : MEAS:TIME:HOLD?
MEASure[:SCALar]:TIME:TRAN?
FETCh[:SCALar]:TIME:TRAN?
Description: Return the measurement value of transfer time (sec)
Query Syntax : MEASure[:SCALar]:TIME:TRAN?
FETCh[:SCALar]:TIME:TRAN?
Response Parameter : <NR2>
Example : MEAS:TIME:TRAN?
8.6.2.7 RLC Measurement
MEASure | FETCh
[:SCALar]
:RLC
:SET
:CAP Return the C measurement value of RLC CP mode
:LS Return the Ls measurement value of RLC CP mode
:RL Return the R
L
measurement value of RLC CP mode
:RS Return the Rs measurement value of RLC CP mode
MEASure[:SCALar]:RLC:SET:CAP?
FETCh[:SCALar]:RLC:SET:CAP?
Description: Return the C measurement value of RLC CP mode
Query Syntax : MEASure[:SCALar]:RLC:SET:CAP?
FETCh[:SCALar]:RLC:SET:CAP?
Response Parameter : <NR2>
Example : MEASure[:SCALar]:RLC:SET:CAP?