Chroma 63800 Series User Manual

Remote Operation
8-19
[LOAD:]CFAC:LIMit?
Description: This command queue the setting range of CF.
Query Syntax : [LOAD:]CFAC:LIMit?
Response Parameter: 1.414~5.000
Example : CFAC:LIM?
8.6.3.6 Power Factor Subsystem
[LOAD:]
PFACtor
[:LEVel]
[:AMPLitude]
[:AC] Set the power factor
:LIMit Return the setting range of PF
[LOAD:]PFACtor[:LEVel][:AMPLitude][:AC]
Description: This command sets the power factor of the electronic load. The electronic load
will attempt to set the power factor to the set value. The power factor set range is coupled to
the crest factor set value. For a crest factor of 1.414, unity power factor is the only valid value.
Setting Syntax : [LOAD:]PFACtor[:LEVel][:AMPLitude][:AC]
Setting Parameter : <NR2>, Range: -1.000 ~ +1.000(AC Mode)
Query Syntax : [LOAD:]PFACtor[:LEVel][:AMPLitude][:AC]?
Response Parameter: <NR2>
Example : PFAC 0.7
[LOAD:]PFAC:LIMit?
Description: This command queries the setting range of PF.
Query Syntax : [LOAD:]PFAC:LIMit?
Response Parameter: -1.000~1.000
Example : PFAC:LIM?
8.6.3.7 RLC Subsystem
[LOAD:]
RLC
:CAP Set the C (AC RLC Mode)
:LS Set the L
S
(AC RLC Mode)
:RL Set the R
L
(AC RLC Mode)
:RS Set the R
S
(AC RLC Mode)
:POW Set the power (AC RLC CP Mode)
:PFAC Set the power factor (AC RLC CP Mode)
[LOAD:] RLC:CAP
Description: It sets the value C, this command is only operating in AC RLC Mode.
Setting Syntax : [LOAD:] RLC:CAP
Setting Parameter : <NR1>, Range: 100 ~ 9999, Unit: uF
Query Syntax : [LOAD:] RLC:CAP?
Response Parameter: <NR1>
Example : RLC:CAP 470

Chroma 63800 Series Specifications

General

Brand	Chroma
Model	63800 Series
Category	Test Equipment
Language	English