EasyManuals Logo

Chroma 63800 Series User Manual

Chroma 63800 Series
198 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #155 background imageLoading...
Page #155 background image
Remote Operation
8-7
8.6.2 Measurement Subsystem
8.6.2.1 Current Measurement
MEASure | FETCh
[:SCALar]
:CURRent Return RMS / real time value of the current
:AMPLitude (AC Mode / DC Mode)
:HOLD The highest peak current measurement is held
:MAX Return peak current
:CREStfactor? Return current crest factor
:PEAK
:NEGative? Return negative peak current
:POSitive? Return positive peak current
MEASure[:SCALar]:CURRent?
FETCh[:SCALar]:CURRent?
Description: Return the RMS / real time (AC Mode / DC Mode) current measured at the input
of electronic load.
Query Syntax : MEASure:CURRent?
FETCh:CURRent?
Response Parameter: <NR2>
Example : MEAS:CURR?
MEASure[:SCALar]:CURRent:AMPLitude:HOLD
FETCh [:SCALar]:CURRent:AMPLitude:HOLD
Description: This command will define the peak current measurement mode. If the hold
command is set to ON, the peak current measurement is updated only when the value
measured exceed the last measured value. If the hold command is set to OFF, the peak
current measurement is updated each cycle. (AC mode only)
Setting Syntax : MEASure[:SCALar]:CURRent:AMPLitude:HOLD
FETCh [:SCALar]:CURRent:AMPLitude:HOLD
Setting Parameter : 0 | OFF, 1 | ON
Query Syntax : MEASure[:SCALar]:CURRent:AMPLitude:HOLD?
FETCh [:SCALar]:CURRent:AMPLitude:HOLD?
Response Parameter: <NR1>
Example : MEAS:CURR:AMPL:HOLD ON
MEASure[:SCALar]:CURRent:AMPLitude:MAX?
FETCh[:SCALar]:CURRent:AMPLitude:MAX?
Description: Return the peak current measured at the input of electronic load.
Query Syntax : MEASure:CURRent:AMPLitude:MAX?
FETCh:CURRent:AMPLitude:MAX?
Response Parameter: <NR2>
Example : MEAS:CURR:AMPL:MAX?
MEASure[:SCALar]:CURRent:CREStfactor?
FETCh[:SCALar]:CURRent:CREStfactor?
Description: Return the current crest factor of the load. This is the ratio of peak load current to
RMS load current.
Query Syntax : MEASure:CURRent:CREStfactor?
FETCh:CURRent:CREStfactor?
Response Parameter: <NR2>

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chroma 63800 Series and is the answer not in the manual?

Chroma 63800 Series Specifications

General IconGeneral
BrandChroma
Model63800 Series
CategoryTest Equipment
LanguageEnglish

Related product manuals