8LIN
WARE CONNECTIONS
8-5
OPERATOR’S MANUAL PRO SERIES
•
If the height of the two machines is not at the same
10
level, adjust the four screws (6) located inside the
floor base furniture of the PRO series.
6
•
When the two machines are aligned, put the two
machines near one another and fix them with the
two knobs (7) by inserting them from the inside of
7
the forniture of the machine which passes the
cards.
•
At the end, fix the plate () under the unloading tray
of the first machine, to the base of the machine
which receives the cards.
•
Utilizzare le viti a brugola fornite in dotazione con il
kit interfaccia Pro Series e serrarle alla base
8
attraverso le apposite aperture presenti nella parete
superiore del mobile ().
9
To Next Page
Loading...
