Security: IPV6 First Hop Security
Common Tasks
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 423
20
STEP 3 If required, either configure a user-defined policy or add rules to the default
policies for the feature.
STEP 4 Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
Router Advertisement Guard Work Flow
STEP 1 In the RA Guard Settings page, enter the list of VLANs on which this feature is
enabled.
STEP 2 In this same page, set the global configuration values that are used if no values are
set in a policy.
STEP 3 If required, either configure a user-defined policy or add rules to the default
policies for the feature.
STEP 4 Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
DHCPv6 Guard Work Flow
STEP 1 In the DHCPv6 Guard Settings page, enter the list of VLANs on which this feature is
enabled.
STEP 2 In this same page, set the global configuration values that are used if no values are
set in a policy.
STEP 3 If required, either configure a user-defined policy or add rules to the default
policies for the feature.
STEP 4 Attach the policy to a VLAN, port or LAG using either the Policy Attachment
(VLAN) or Policy Attachment (Port) pages.
Neighbor Discovery Inspection Work Flow
STEP 1 In the ND Inspection Settings page, enter the list of VLANs on which this feature is
enabled.
STEP 2 In this same page, set the global configuration values that are used if no values are
set in a policy.
To Next Page
Loading...
