Cisco 7962G Administration Guide

5-3
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Barge (and cBarge) Allows a user to join a non-private call on a shared
phone line. Barge features include cBarge and
Barge.
• cBarge adds a user to a call and converts it into
a conference, allowing the user and other
parties to access conference features.
• Barge adds a user to a call but does not convert
the call into a conference.
The phones support Barge in two conference
modes:
• Built-in conference bridge at the target device
(the phone that is being barged). This mode
uses the Barge softkey.
• Shared conference bridge. This mode uses the
cBarge softkey.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Cisco Unified IP
Phone Configuration” chapter.
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phones”
chapter.
• Cisco Unified Communications Manager
Features and Services Guide, “Barge and
Privacy” chapter.
Block external to
external transfer
Prevents users from transferring an external call to
another external number.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, “External Call Transfer
Restrictions” chapter.
Busy Lamp Field
(BLF)
Allows a user to monitor the call state of a
directory number associated with a speed-dial
button, call log, or directory listing on the phone.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, “Presence” chapter.
Busy Lamp Field
(BLF) Pickup
(SCCP only)
Provides enhancements to BLF speed dial. Allows
you to configure a Directory Number (DN) that a
user can monitor for incoming calls. When the DN
receives an incoming call, the system alerts the
monitoring user, who can then pick up the call.
For more information, refer to Cisco Unified
Communications Manager Feature and
Services Guide, “Call Pickup” chapter.
Call Back Provides users with an audio and visual alert on the
phone when a busy or unavailable party becomes
available.
For more information, refer to:
• Cisco Unified Communications Manager
System Guide, “Cisco Unified IP Phones”
chapter.
• Cisco Unified Communications Manager
Features and Services Guide, “Call Back”
chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference

Cisco 7962G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Case material	ABS
Product color	Black, Grey
Wall mountable	Yes
Bluetooth	No
Security algorithms	128-bit AES, 802.1x RADIUS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Ethernet LAN (RJ-45) ports	2
Voice codecs	G.711, G.711a, G.722, G.729A, G.729ab, iLBC
Volume control	Digital
Display diagonal	5 \
Display resolution	320 x 222 pixels
Display number of colors	Monochrome
Caller ID	-
Lines quantity	- lines
Phonebook capacity	- entries
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	203.2 mm
Width	266.7 mm
Height	152.4 mm
Weight	1600 g