5-5
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
OL-18913-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Call Park Allows users to park (temporarily store) a call and
then retrieve the call by using another phone in the
Cisco Unified Communications Manager system.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Call Park and Directed
Call Park” chapter.
Call Pickup Allows users to redirect a call that is ringing on
another phone within their pickup group to their
phone.
You can configure an audio and/or visual alert for
the primary line on the phone. This alert notifies
the users that a call is ringing in their pickup group.
For more information, refer to Cisco Unified
Communications Manager Features and
Services Guide, “Call Pickup Configuration”
chapter.
Call Recording Enables recording of an active call. The user might
hear an intermittent tone (beep tone) during a call
when it is being recorded.
Note The intercom feature is disabled when a
call is being monitored or recorded.
For more information, refer to the Cisco
Unified Communications Manager Features
and Services Guide, “Monitoring and
Recording” chapter.
Call Waiting Indicates (and allows users to answer) an incoming
call that rings while on another call. Displays
incoming call information on the phone screen.
For more information, refer to the Cisco
Unified Communications Manager System
Guide, “Understanding Directory Numbers”
chapter.
Caller ID Displays caller identification such as a phone
number, name, or other descriptive text on the
phone screen.
For more information, refer to:
• Cisco Unified Communications Manager
Administration Guide, “Configuring
Cisco Unified IP Phones” chapter.
• Cisco Unified Communications Manager
System Guide, “Understanding Route
Plans” chapter.
• Cisco Unified Communications Manager
Features and Services Guide, “Call
Display Restrictions” chapter.
• Cisco Unified Communications Manager
Administration Guide, “Directory
Number Configuration” chapter.
Caller ID Blocking Allows a user to block their phone number or
e-mail address from phones that have caller
identification enabled.
For more information, refer to:
Cisco Unified Communications Manager
System Guide, “Understanding Route Plans”
chapter.
Cisco Unified Communications Manager
Administration Guide, “Directory Number
Configuration” chapter.
Cisco Unified Communications Manager
Administration Guide, “SIP Profile
Configuration” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
