Cisco Catalyst 2960-XR User Manual

Monitoring 802.1x Statistics and Status
Table 26: Privileged EXEC show Commands
PurposeCommand
Displays 802.1x statistics for all portsshow dot1x all statistics
Displays 802.1x statistics for a specific port
show dot1x interface interface-id statistics
Displays the 802.1x administrative and operational
status for a switch
show dot1x all [count | details | statistics |
summary]
Displays the 802.1x administrative and operational
status for a specific port
show dot1x interface interface-id
Table 27: Global Configuration Commands
PurposeCommand
Filters verbose 802.1x authentication messages
(beginning with Cisco IOS Release 12.2(55)SE)
no dot1x logging verbose
For detailed information about the fields in these displays, see the command reference for this release.
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
300 OL-29434-01
Configuring IEEE 802.1x Port-Based Authentication
Monitoring 802.1x Statistics and Status

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C