Cisco Catalyst 2960-XR - Configuring Settings for All RADIUS Servers

PurposeCommand or Action
Enables RADIUS accounting for all network-related
service requests.
aaa accounting network start-stop radius
Example:
Switch(config)# aaa accounting network
Step 2
start-stop radius
Enables RADIUS accounting to send a start-record
accounting notice at the beginning of a privileged EXEC
process and a stop-record at the end.
aaa accounting exec start-stop radius
Example:
Switch(config)# aaa accounting exec start-stop
radius
Step 3
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 4
What to Do Next
To establishing a session with a router if the AAA server is unreachable, use the aaa accounting system
guarantee-first command. This command guarantees system accounting as the first record, which is the
default condition. In some situations, users might be prevented from starting a session on the console or
terminal connection until after the system reloads, which can take more than 3 minutes.
To establish a console or Telnet session with the router if the AAA server is unreachable when the router
reloads, use the no aaa accounting system guarantee-first command.
Related Topics
RADIUS Accounting, on page 63
Configuring Settings for All RADIUS Servers
Beginning in privileged EXEC mode, follow these steps to configure settings for all RADIUS servers:
SUMMARY STEPS
1.
configure terminal
2.
radius-server key string
3.
radius-server retransmit retries
4.
radius-server timeout seconds
5.
radius-server deadtime minutes
6.
end
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29434-01 73
Configuring RADIUS
Configuring Settings for All RADIUS Servers