Cisco Catalyst 2960-XR - Monitoring Switch Access

SUMMARY STEPS
1.
enable level
2.
disable level
DETAILED STEPS
PurposeCommand or Action
Logs in to a specified privilege level.
enable level
Step 1
Example:
Switch> enable 15
Following the example, Level 15 is privileged EXEC mode.
For level, the range is 0 to 15.
Exits to a specified privilege level.
disable level
Step 2
Example:
Switch# disable 1
Following the example, Level 1 is user EXEC mode.
For level, the range is 0 to 15.
Related Topics
Privilege Levels, on page 24
Monitoring Switch Access
Table 5: Commands for Displaying DHCP Information
Displays the privilege level configuration.show privilege
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
34 OL-29434-01
Controlling Switch Access with Passwords and Privilege Levels
Monitoring Switch Access