Cisco Catalyst 2960-XR - Applying a VLAN Map to a VLAN

PurposeCommand or Action
Returns to global configuration mode.end
Example:
Switch(config-access-map)# end
Step 5
Displays the access list configuration.show running-config
Example:
Switch# show running-config
Step 6
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config
Step 7
startup-config
Related Topics
Configuring VLAN Maps, on page 135
Applying a VLAN Map to a VLAN
Beginning in privileged EXEC mode, follow these steps to apply a VLAN map to one or more VLANs:
SUMMARY STEPS
1.
configure terminal
2.
vlan filter mapname vlan-list list
3.
end
4.
show running-config
5.
copy running-config startup-config
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
138 OL-29434-01
Configuring IPv4 ACLs
Applying a VLAN Map to a VLAN