Cisco Catalyst 2960-XR User Manual

PurposeCommand or Action
Example:
Switch(config)# line console 0
or
Switch(config)# line vty 15
Enables local password checking at login time. Authentication is based
on the username specified in Step 2.
login local
Example:
Switch(config-line)# login local
Step 4
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 5
Related Topics
Preventing Unauthorized Access, on page 19
Username and Password Pairs, on page 23
Setting the Privilege Level for a Command
Beginning in privileged EXEC mode, follow these steps to set the privilege level for a command:
SUMMARY STEPS
1.
configure terminal
2.
privilege mode level level command
3.
enable password level level password
4.
end
DETAILED STEPS
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 1
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29434-01 31
Controlling Switch Access with Passwords and Privilege Levels
Setting the Privilege Level for a Command

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C