Cisco Catalyst 2960-XR User Manual

Local Web Authentication Banner
With Web Authentication, you can create a default and customized web-browser banners that appears when
you log in to a switch.
The banner appears on both the login page and the authentication-result pop-up pages. The default banner
messages are as follows:
•
Authentication Successful
•
Authentication Failed
•
Authentication Expired
The Local Web Authentication Banner can be configured in legacy and new-style (Session-aware) CLIs as
follows:
• Legacy mode—Use the ip admission auth-proxy-banner http global configuration command.
• New-style mode—Use the parameter-map type webauth global bannerglobal configuration command.
The default banner Cisco Systems and Switch host-name Authentication appear on the Login Page. Cisco
Systems appears on the authentication result pop-up page.
Figure 23: Authentication Successful Banner
The banner can be customized as follows:
•
Add a message, such as switch, router, or company name to the banner:
◦ Legacy mode—Use the ip admission auth-proxy-banner http banner-textglobal configuration
command.
◦ New-style mode—Use the parameter-map type webauth global bannerglobal configuration
command
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
304 OL-29434-01
Configuring Web-Based Authentication
Local Web Authentication Banner

Cisco Catalyst 2960-XR Specifications

General

Stacking Bandwidth	80 Gbps
Layer Support	Layer 2 and Layer 3
Jumbo Frame Support	9198 bytes
RAM	512 MB
Input Voltage	100-240V AC
Model	Catalyst 2960-XR
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Downlink Interfaces	24 or 48 x Gigabit Ethernet ports
Power Supply	Internal
MAC Address Table Size	16, 000 entries
PoE	Available on PoE models
Weight	4.5 kg
Features	energy efficiency
Stacking	Up to 8 switches
Operating Temperature	0 to 45°C