CHAPTER 19
Configuring Cisco TrustSec
•
Configuring Cisco TrustSec, page 373
•
Finding Feature Information, page 373
•
Information About Cisco TrustSec, page 374
•
Feature Information for Cisco TrustSec, page 375
Configuring Cisco TrustSec
Cisco TrustSec provides security improvements to Cisco network devices based on the capability to strongly
identify users, hosts, and network devices within a network. TrustSec provides topology-independent and
scalable access controls by uniquely classifying data traffic for a particular role. TrustSec ensures data
confidentiality and integrity by establishing trust among authenticated peers and encrypting links with those
peers.
The key component of Cisco TrustSec is the Cisco Identity Services Engine (ISE). Cisco ISE can provision
switches with TrustSec Identities and Security Group ACLs (SGACLs), though these may be configured
manually on the switch.
Finding Feature Information
To configure Cisco TrustSec on the switch, see the Cisco TrustSec Switch Configuration Guide at the following
URL:
www.cisco.com/en/US/docs/switches/lan/trustsec/configuration/guide/trustsec.html
Release notes for Cisco TrustSec General Availability releases are at the following URL:
www.cisco.com/en/US/docs/switches/lan/trustsec/release/notes/rn_cts_crossplat.html
Additional information about the Cisco TrustSec solution, including overviews, datasheets, and case studies,
is available at:
www.cisco.com/en/US/netsol/ns1051/index.html
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29434-01 373
To Next Page
Loading...
