Cisco Catalyst 2960-XR - Configuring AAA Authentication

PurposeCommand or Action
Returns to configuration mode.exit
Example:
Switch(config-if)# exit
Step 6
Enables the IP device tracking table.ip device tracking
Example:
Switch(config)# ip device tracking
Step 7
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 8
Displays the configuration.show ip admission status
Example:
Switch# show ip admission status
Step 9
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 10
Configuring AAA Authentication
Beginning in privileged EXEC mode, follow these steps to configure AAA authentication:
SUMMARY STEPS
1.
configure terminal
2.
aaa new-model
3.
aaa authentication login default group {tacacs+ | radius}
4.
aaa authorization auth-proxy default group {tacacs+ | radius}
5.
tacacs-server host {hostname | ip_address}
6.
tacacs-server key {key-data}
7.
end
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29434-01 313
Configuring Web-Based Authentication
Configuring AAA Authentication