Cisco Catalyst 2960-XR - Page 336

DETAILED STEPS
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 1
Enables AAA functionality.aaa new-model
Example:
Switch(config)# aaa new-model
Step 2
Defines the list of authentication methods at login.aaa authentication login default group {tacacs+ | radius}
Example:
Switch(config)# aaa authentication login default group
Step 3
tacacs+
Creates an authorization method list for web-based
authorization.
aaa authorization auth-proxy default group {tacacs+ |
radius}
Example:
Switch(config)# aaa authorization auth-proxy default
Step 4
group tacacs+
Specifies an AAA server.
tacacs-server host {hostname | ip_address}
Example:
Switch(config)# tacacs-server host 10.1.1.1
Step 5
Configures the authorization and encryption key
used between the switch and the TACACS server.
tacacs-server key {key-data}
Example:
Switch(config)# tacacs-server key
Step 6
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 7
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
314 OL-29434-01
Configuring Web-Based Authentication
Configuring AAA Authentication