200.1.1.1 0001.0600.0000 8 GigabitEthernet1/0/1 INACTIVE
200.1.1.2 0001.0600.0000 8 GigabitEthernet1/0/1 INACTIVE
200.1.1.3 0001.0600.0000 8 GigabitEthernet1/0/1 INACTIVE
200.1.1.4 0001.0600.0000 8 GigabitEthernet1/0/1 INACTIVE
200.1.1.5 0001.0600.0000 8 GigabitEthernet1/0/1 INACTIVE
200.1.1.6 0001.0600.0000 8 GigabitEthernet1/0/1 INACTIVE
200.1.1.7 0001.0600.0000 8 GigabitEthernet1/0/1 INACTIVE
This example displays the count of all IP device tracking host entries for all interfaces:
Switch# show ip device tracking all count
Total IP Device Tracking Host entries: 5
---------------------------------------------------------------------
Interface Maximum Limit Number of Entries
---------------------------------------------------------------------
Gi1/0/3 5
Monitoring IP Source Guard
Table 20: Privileged EXEC show Commands
PurposeCommand
Displays the IP source guard configuration on the
switch or on a specific interface.
show ip verify source [ interface interface-id ]
Displays information about the entries in the IP device
tracking table.
show ip device tracking { all | interface interface-id
| ip ip-address | mac imac-address}
Table 21: Interface Configuration Commands
PurposeCommand
Verifies the data source.ip verify source tracking
For detailed information about the fields in these displays, see the command reference for this release.
Catalyst 2960-XR Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29434-01 193
Configuring IP Source Guard
Monitoring IP Source Guard
To Next Page
Loading...
