2-633
Catalyst 2960 Switch Command Reference
OL-8604-03
Chapter 2 Catalyst 3750 Switch Cisco IOS Commands
snmp-server enable traps
Note Though visible in the command-line help strings, the cpu [threshold], insertion, removal, and rtr
keywords are not supported. The snmp-server enable informs global configuration command is not
supported. To enable the sending of SNMP inform notifications, use the snmp-server enable traps
global configuration command combined with the snmp-server host host-addr informs global
configuration command.
Defaults The sending of SNMP traps is disabled.
Command Modes Global configuration
Command History
vlancreate (Optional) Enable SNMP VLAN-created traps.
vlandelete (Optional) Enable SNMP VLAN-deleted traps.
vtp (Optional) Enable VLAN Trunking Protocol (VTP) traps.
Release Modification
12.2(25)FX This command was introduced.
12.2(37)SE The errdisable notification-rate value keywords were added.
To Next Page
Loading...
