Claas DOMINATOR 130 - Removing the Stands

00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 131
8 Mounting/removing front attachment
8.2 Installing the front attachment
67084
– Plug connector (1) into socket (2).
– Plug connector (3) into socket (4).
71387
8.2.6 Removing the stands
– Observe the general warnings at the beginning of
the Fitting / removing the front attachment
chapter.
– Loosen spring at (1).
– Remove stand (2) from the base frame.
– Repeat this process on the other side of the front
attachment.
12
24274
13
24275
3
1
4
2
14
17304
2
1