EasyManua.ls Logo

Claas DOMINATOR 130 - Separation; Separation Problem and Remedy

Claas DOMINATOR 130
390 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
252 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
12 Faults and remedies
12.6 Separation
67088
12.6 Separation
87903
12.6.1 Separation problem and remedy
Observe the general warnings at the beginning of
the "Trouble and remedy" chapter.
Malfunction Cause, remedy
Straw walker
Plugging on the straw walker Adjust tension of straw walker drive belt.
Remove soling (awn accumulations) on the straw
walker.
Slip reported from different units If necessary, check tight seat and correct position of
cam wheels.
The separation performance monitor displays insuf-
ficient performance.
Clean sensor trough.
Check tight seat of sensor trough and sensor.
Loose sensor trough - Tighten sensor trough.
Loose sensor - Replace sensor trough.

Table of Contents

Related product manuals