262 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.2 General Information
67089
– Check if wheel nuts / wheel bolts are tightly seated
every time after fitting a wheel and after the speci-
fied maintenance interval or tighten them.
– Retighten the track adjustment elements in
accordance with the manufacturer's instructions
– The tyres must only be ballasted to the extent that
the specified tyre pressures can be
maintained.
– Keep oil and grease away from tyres.
– Check tyres for damage regularly on the inside as
well.
– Do not clean tyres by applying a steam cleaner
directly.
11118
13.2.10 Hydraulic system
Danger!
Work on the hydraulic system.
Death or serious injury
– Relieve the hydraulic pressure before
working on the system.
Danger!
Dealing incorrectly with injuries due to hydrau-
lic fluids.
Death or serious injury.
Even a pinhole can result in severe injuries.
– If hydraulic fluid gets in the skin or eyes,
have the injury treated by a medical spe-
cialist immediately.
Danger!
Pre-loaded energy accumulators (spring,
accumulator, hydraulic cylinder).
Death or serious injury.
– Only have authorised and qualified work-
shops carry out work on energy
accumulators.
To Next Page
Loading...
