Claas DOMINATOR 130 - Removing the Front Attachment; Fitting the Stands

00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 133
8 Mounting/removing front attachment
8.3 Removing the front attachment
67084
8.3 Removing the front attachment
71384
8.3.1 Fitting the stands
– Observe the general warnings at the beginning of
the Fitting / removing the front attachment
chapter.
– Remove support (1) from bracket.
– Suspend the stand (1) at the base frame.
– Secure stand (1) to bolt (2) by means of the
spring.
– Repeat this process on the other side of the front
attachment.
17
24170
18
24512
1
1
19
17304
1
2