00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 295
13 Maintenance
13.5 Engine
67089
– Unscrew filter (2).
– Apply some oil to the new seal and screw on new
filter (2) until the filter seal touches the filter head.
Tighten the filter by hand.
– Top up oil at position (A).
– Check the oil level.
Top up oil if required.
– Screw on the lid (1) at position (A).
– Start the diesel engine.
Let the diesel engine run at lower no-load speed
for about 10 seconds.
– Check the oil level.
Top up oil if required.
38745
13.5.20 Adjusting the diesel engine valves
– Observe the information provided in the operator's
manual of the engine manufacturer.
86455
13.5.21 Checking the radiator coolant level
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Let diesel engine cool down.
– Ensure that the drain cock of the cooling system is
closed.
38
27295
39
29342
40
29343
2
A
1
2
A
1
2
A
1
WARNING:
Use of unpermissible spare parts or
lubricants.
Machine damage or increased wear.
– Spare parts and lubricants must at least
comply with the technical standards
required by the manufacturer of the
implement!
– The use of genuine CLAAS spare parts
and lubricants is recommended.
Caution!
Machine operation with unpermitted or pol-
luted lubricants.
Machine damage.
– Ensure a clean environment.
– Use suitable and clean tools.
– Use permitted lubricants.
– Lubricants must be free of pollution.
To Next Page
Loading...
