Claas DOMINATOR 130 - Cleaning the Surroundings of the Drive Axle Manual Gearbox; Checking the Final Drive Oil Level DOMINATOR 150; 140

308 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.6 Chassis
67089
Rear axle / rear drive axle
39373
13.6.3 Cleaning the surroundings of the drive
axle manual gearbox
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Clean surroundings of gearbox on the machine.
86778
13.6.4 Checking the final drive oil level
DOMINATOR 150 / 140
– Park the machine on level ground.
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
61
Rear axle decal
30789
Danger!
Wheel bolts / wheel nuts may come loose
when not tightened as specified.
Death or serious injuries!
– Retighten all wheel bolts / wheel nuts on
new machines and when wheels have
been removed and refitted.
Observe the maintenance intervals:
- immediately after installation.
- after the first 10 working hours.
- after the first 100 working hours.
– The threads must be clean and free of
grease.
– Tighten wheel bolts / wheel nuts
crosswise.
– Observe the tightening torque.
Tightening torque of rear axle wheels / rear drive axle wheels
Use Designation of thread, type of
fastening
Wrench size Tightening
torque
Rear axle M18 x 1.5 - 8.8, bolt with spring
washer C 18.5 DIN 74361 (Limes type
conical spring washer)
260 Nm
62
14198