00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 185
10 Fieldwork settings
10.6 Crop receptacle / straw receptacle
67086
10.6 Crop receptacle / straw receptacle
83761
10.6.1 Removing the straw guide plate
(straw chopper with standard spreader)
To provide better access to the cutting cylinder, the
straw guide plate must be removed / folded down.
– Observe the general warnings at the beginning of
the "Fieldwork settings" chapter.
The straw chopper is in the front position (putting the
straw chopper out of operation).
– Unscrew the turn lock (13).
– Unhinge connecting rod at position (A).
– Swivel standard spreader (9) downwards.
Danger!
The cutting cylinders of the straw chopper can
run on even if the drive is switched off.
Death or serious injuries!
– Never touch any machine parts that con-
tinue running.
– Wait until all machine parts have com-
pletely stopped moving.
26
28748
12
13
12
27
28802
9
A
To Next Page
Loading...
