Claas DOMINATOR 130 - Cab; Operators Platform; Cleaning; Changing the Cab Air Filter; Cleaning the Cab Recirculation Air Filter

348 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.11 Cab / Operator's platform
67089
13.11 Cab / Operator's platform
86809
13.11.1 Cleaning / changing the cab air filter
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Use a suitable ladder on the right machine side.
– Open cab roof (1).
– Open frame (2).
– Remove filter (3).
– Clean filter surface by vacuum cleaning, knocking
on it or blowing off with compressed air.
– Replace damaged filters and sealing profiles.
– Close cab roof (1).
86833
13.11.2 Cleaning the cab recirculation air filter
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Remove the recirculation air grille (1).
– Clean filter surface by vacuum cleaning, knocking
on it or blowing off with compressed air.
– Replace damaged filters.
– Install recirculation air grille (1).
Warning!
Incorrectly installed or defective air filter.
Dust getting into the cab.
Dust is inhaled and causes damage to your
health.
– Ensure tight seat of filter.
– Replace defective air filters immediately.
Danger!
Danger of falling!
Death or serious injuries!
– Use a suitable ladder.
122
23853
3
1
2
123
29686
1