Claas DOMINATOR 130 - Safety Decals; General Instructions on Safety Decals; Chassis

74 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
3 Safety
3.4 Safety decals
67079
3.4 Safety decals
39016
3.4.1 General instructions on safety decals
89475
3.4.2 Chassis
00 0516 928 0
113
Observe instructions provided on the decal (1). Check
wheel nut / wheel bolt tightening torque.
00 0514 234 0
115
Observe instructions provided on the decal (1). Check
wheel nut / wheel bolt tightening torque.
Danger!
Hazard points on the machine.
Death or serious injury!
– Hazard warning signs / safety decals that
are damaged or unrecognisable must be
replaced immediately by new ones.
– When parts that have hazard warning
signs / safety decals are replaced, always
make sure to attach the relevant new haz-
ard warning signs / safety decals to
each new part.
112
Drive axle
9617
1
114
Rear axle
30792
1