00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 309
13 Maintenance
13.6 Chassis
67089
– Unscrew bolt (1).
The oil level must be up to the bore at bolt (1).
– Top up oil if required.
– Remove dirt from bolt (1).
– Screw in bolt (1) with sealant.
– Repeat this procedure on the other side of the
machine.
86780
13.6.5 Draining the final drive oil
DOMINATOR 150 / 140
– Park the machine on level ground.
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
Caution!
Machine operation with unpermitted or pol-
luted lubricants.
Machine damage.
– Ensure a clean environment.
– Use suitable and clean tools.
– Use permitted lubricants.
– Lubricants must be free of pollution.
63
23392
1
Warning!
Contact with hot liquids or machine parts.
Danger of burns
– Wear suitable protective clothing.
– Let liquids or machine parts cool down.
– Comply with instructions.
Environment!
Lubricants and fuels end up in the
environment.
Environmental pollution.
– Lubricants and fuels must be collected
and stored in suitable containers and dis-
posed of in a way that is harmless to the
environment and in accordance with
existing anti-pollution regulations.
To Next Page
Loading...
