EasyManua.ls Logo

Claas DOMINATOR 130 - Grain Delivery; Closing the Service Aperture on the Grain Tank Unloading Tube; Installing the Grain Tank Safety Device

Claas DOMINATOR 130
390 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 99
5 Prior to initial operation
5.6 Grain delivery
67081
5.6 Grain delivery
79443
5.6.1 Closing the service aperture on the grain
tank unloading tube
Observe the general warnings at the beginning of
the Prior to initial operation chapter.
The service aperture on the grain tank unloading tube
serves as a water drain, e.g. for cleaning.
Close the service aperture and screw in bolt (1)
before putting the machine into operation for the
first time.
83027
5.6.2 Installing the grain tank safety device
Observe the general warnings at the beginning of
the Prior to initial operation chapter.
Open the grain tank cover and fold it open to the
rear as far as possible.
Install safety device (1) into the rails (2).
15
19660
1
Warning!
Sharp edges and pointed machine parts.
Slight injuries.
Do not touch sharp edges of the auger
flights.
Wear safety gloves.
Note!
Open service aperture.
Trickling losses.
Close the service aperture and screw in
bolt (1).
16
10456
1
2
2
Danger!
Danger of falling!
Death or serious injuries!
Arrange for additional safety precautions.
Only enter areas protected by railings.
Areas originally without railings must be
protected by additional railings.

Table of Contents

Related product manuals