Claas DOMINATOR 130 - Removing Universal Drive Shaft

00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 135
8 Mounting/removing front attachment
8.3 Removing the front attachment
67084
– Disconnect connector (1) and place it in
holder (2).
– Disconnect connector (3) and place it in
holder (4).
71364
8.3.4 Removing universal drive shaft
– Observe the general warnings at the beginning of
the Fitting / removing the front attachment
chapter.
– Push back or swing up protective guard (1),
depending on the version.
– Push in the locking pin (2).
Pull universal drive shaft off of drive pin.
– Pull out or fold down protective guard (1), depend-
ing on the version.
22
24275
23
24274
3
1
4
2
24
DOMINATOR
19527
1