Claas DOMINATOR 130 - Adjusting Belt (R1)

00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 323
13 Maintenance
13.8 Drive belts / drive chains
67089
72131
13.8.4 Adjusting belt (R1)
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Loosen nut (1).
– Turn nuts (2) and (3) until the belt is tensioned.
– Lock nuts (2) and (3).
– Tighten nut (1).
Tightening torque = 130 Nm
– Carry out a test run and check belt tension.
29864
80
R1
1
2
3
81
23846
1
3
2