00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 307
13 Maintenance
13.6 Chassis
67089
89477
13.6.2 Checking the tightening torque of
wheel nuts / wheel bolts
– Tighten all wheel nuts / wheel bolts (1) of the
machine on the drive axle and the rear axle as
specified.
Drive axle
59
9617
1
60
Drive axle decal
30848
Danger!
Wheel bolts / wheel nuts may come loose
when not tightened as specified.
Death or serious injuries!
– Retighten all wheel bolts / wheel nuts on
new machines and when wheels have
been removed and refitted.
Observe the maintenance intervals:
- immediately after installation.
- after the first working hour.
- during the first 50 working hours: every
10 working hours.
– The threads must be clean and free of
grease.
– Tighten the wheel bolts / wheel nuts
crosswise (as numbered on the decal).
– Observe the tightening torque.
Tightening torque of drive axle wheels
Use Designation of thread, type of
fastening
Wrench size Tightening
torque
Drive axle M22 x 1.5 - 8.8, nut with spring
washer C 18.5 DIN 74361 (Limes type
conical spring washer)
30 520 Nm
To Next Page
Loading...
