00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 17
1 Introduction
1.1 General Information
67077
References can easily be distinguished by suitable
symbols. The following symbols are distinguished:
Document structure based on subassemblies
As far as the contents permit, the chapters of this man-
ual are structured according to subassemblies. The
structure of these subassemblies is the same in all
chapters.
Different product groups have different document
structures based on subassemblies. CLAAS always
takes care to keep these document structures based
on subassemblies identical in any documents.
Search and find
The wanted subject can easily be found with the recur-
ring subassembly structure, using the table of contents
or the header line of this manual.
In addition, the index of this manual is a useful tool for
locating a specific subject. The index can be found on
the last pages of this manual.
Directions
Text elements such as front, rear, right and left always
apply to the direction of travel. In figures, the direction
of travel may be indicated by a direction arrow.
Optional equipment and accessories
Optional equipment includes equipment variants of the
machine where different variants are available, but
only one variant can be fitted.
Accessories are equipment items that may be addi-
tionally fitted to the machine, but are not included in
the standard scope of the machine.
Both terms designate possible variants. Standard
scopes and equipment variants may differ in other
countries.
Your CLAAS Service Department
Symbol Meaning Description
See index The symbol indicates that further information on
this subject can be found at another point in this
manual.
See index of the relevant
Operator's manual
The symbol indicates that further information on
this subject can be found in the Operator's manual of
that machine or equipment.
To Next Page
Loading...
Need help?
General
